1-18
poe-profile
Syntax
poe-profile profile-name [ index ]
undo poe-profile { index index | name profile-name }
View
System view
Default Level
2: System level
Parameters
profile-name: Name of a PoE configuration file, a string of 1 to 15 characters. A PoE configuration file
name begins with a letter (a through z or A through Z) and must not contain reserved keywords such
as undo, all, name, interface, user, poe, disable, max-power, mode, priority and enable.
index: Index number of a PoE configuration file, in the range 1 to 100.
Description
Use the poe-profile profile-name command to create a PoE configuration file and enter PoE-profile
view.
Use the undo poe-profile command to delete the specified PoE configuration file.
If no index is specified, the system automatically assigns an index to the PoE configuration file,
starting from 1.
Note that if a PoE configuration file is already applied to a PoE interface, you cannot delete it. To
delete the file, you must first execute the undo apply poe-profile command to remove the application
of the PoE configuration file to the PoE interface.
Examples
# Create a PoE configuration file, name it abc, and specify the index number as 3.
<Sysname> system-view
[Sysname] poe-profile abc 3
To Next Page
Loading...
Need help?
General