1-16
reset stp
Syntax
reset stp [ interface interface-list ]
View
User view
Default Level
1: Monitor level
Parameters
interface interface-list: Clears the MSTP statistics of the ports specified in the format of interface-list =
{ interface-type interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10>
indicates that you can specify up to 10 ports or port ranges.
Description
Use the reset stp command to clear the MSTP statistics.
The MSTP statistics includes the numbers of TCN BPDUs, configuration BPDUs, RST BPDUs and
MST BPDUs sent/received through the specified ports (STP BPDUs and TCN BPDUs are counted only
for the CIST).
Note that this command clears the spanning tree-related statistics on the specified ports if you specify
the interface-list argument; otherwise, this command clears the spanning tree-related statistics on all
ports.
Related commands: display stp.
Examples
# Clear the spanning tree-related statistics on ports GigabitEthernet 1/0/1 through GigabitEthernet
1/0/3.
<Sysname> reset stp interface gigabitethernet 1/0/1 to gigabitethernet 1/0/3
revision-level
Syntax
revision-level level
undo revision-level
View
MST region view
Default Level
2: System level
Parameters
level: MSTP revision level, in the range of 0 to 65535.
To Next Page
Loading...
Need help?
General