H3C S5120-SI Series Command Reference

4-2
Table 4-1 display bootp client command output description
Field Description
Ethernet1/1 BOOTP client information or
Vlan-interface1 BOOTP client information
Information of the interface serving as a BOOTP
client
Allocated IP
BOOTP client’s IP address allocated by the BOOTP
server
Transaction ID
Value of the XID field in a BOOTP message, namely,
a random number chosen while the BOOTP client
sends a BOOTP request to the BOOTP server. It is
used to match a response message from the BOOTP
server. If the values of the XID field are different in the
BOOTP response and request, the BOOTP client will
drop the BOOTP response.
Mac Address MAC address of a BOOTP client
ip address bootp-alloc
Syntax
ip address bootp-alloc
undo ip address bootp-alloc
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the ip address bootp-alloc command to enable an interface to obtain an IP address through
BOOTP.
Use the undo ip address bootp-alloc command to disable the interface from obtaining an IP address
through BOOTP.
By default, an interface does not obtain an IP address through BOOTP.
Related commands: display bootp client.
Examples
# Configure VLAN-interface 1 to obtain IP address through BOOTP protocol.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ip address bootp-alloc

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English