H3C S5120-SI Series

1-3
Default Level
1: Monitor level
Parameters
None
Description
Use the display mac-address aging-time command to display the aging time of dynamic entries in the
MAC address table.
Related commands: mac-address (system view), mac-address (Ethernet interface view),
mac-address timer, display mac-address.
Examples
# Display the aging time of dynamic entries in the MAC address table.
<Sysname> display mac-address aging-time
Mac address aging time: 300s
The above information indicates that the aging time of dynamic entries in the MAC address table is 300
seconds.
display mac-address statistics
Syntax
display mac-address statistics
View
Any view
Default Level
1: Monitor level
Parameters
statistics: Displays the statistics of the MAC address table.
Description
Use the display mac-address statistics command to display the statistics of the MAC address table.
Examples
# Display the statistics of the MAC address table.
<Sysname> display mac-address statistics
MAC TYPE LEARNED USER-DEFINED SYSTEM-DEFINED IN-USE AVAILABLE
Dynamic Unicast 24 0 0 24
Static Unicast 0 0 0 0 1024
Total Unicast 24 8192
Dynamic Multicast 0 0 0 0
Static Multicast 0 0 0 0 4094
Total Multicast 0 0