1-6
Default Level
2: System level
Parameters
tcl-name: Class name, a string of 1 to 31 characters.
and: Specifies the relationship between the match criteria in the class as logical AND. That is, the
packets that match all the criteria belong to this class.
or: Specifies the relationship between the criteria in the class as logical OR. That is, the packets that
match any of the criteria belong to this class.
Description
Use the traffic classifier command to define a class and enter class view.
Use the undo traffic classifier command to remove a class.
By default, the relationship between match criteria is and.
Related commands: qos policy, qos apply policy, classifier behavior.
Examples
# Define a class named class1.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1]
Traffic Behavior Configuration Commands
display traffic behavior
Syntax
display traffic behavior user-defined [ behavior-name ]
View
Any view
Default Level
1: Monitor level
Parameters
user-defined: Displays user-defined traffic behaviors.
behavior-name: Behavior name, a string of 1 to 31 characters. If no traffic behavior is specified, the
information of all the user-defined behaviors is displayed.
Description
Use the display traffic behavior command to display traffic behavior information.
Examples
# Display user-defined traffic behaviors.
To Next Page
Loading...
Need help?
General