1-9
Parameters
None
Description
Use the display ssh client source command to display the source IP address or source interface
currently set for the SSH client.
If neither source IP address nor source interface is specified for the SSH client, the system will display
such a message “Neither source IP address nor source interface was specified for the STelnet client.”
Related commands: ssh client source.
Examples
# Display the source IP address of the SSH client.
<Sysname> display ssh client source
The source IP address you specified is 192.168.0.1
display ssh server-info
Syntax
display ssh server-info
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ssh server-info command on a client to display mappings between SSH servers and
their host public keys saved on the client.
When an SSH client needs to authenticate the SSH server, it uses the locally saved public key of the
server for the authentication. If the authentication fails, you can use this command to check the public
key of the server saved on the client.
Related commands: ssh client authentication server.
This command is also available on an SFTP client.
To Next Page
Loading...
Need help?
General