1-1
1 LLDP Configuration Commands
LLDP Configuration Commands
display lldp local-information
Syntax
display lldp local-information [ global | interface interface-type interface-number ]
View
Any view
Default level
1: Monitor level
Parameters
global: Displays the global LLDP information to be sent.
interface interface-type interface-number: Displays the LLDP information to be sent out the port
specified by its type and number.
Description
Use the display lldp local-information command to display the LLDP information to be sent, which will
be contained in the LLDP TLVs and sent to neighbor devices.
If no keyword or argument is specified, this command displays all the LLDP information to be sent,
including the global LLDP information and the LLDP information about the LLDP-enabled ports in the up
state.
Examples
# Display all the LLDP information to be sent.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID : 00e0-fc00-5600
System name : Sysname
System description : System
System capabilities supported : Bridge,Router
System capabilities enabled : Bridge,Router
MED information
Device class: Connectivity device
HardwareRev : REV.A
FirmwareRev : 109
To Next Page
Loading...
Need help?
General