1-18
With the remote-path not specified, the command displays information about the files and
sub-directories of the current working directory.
This command functions as the ls command.
Examples
# Display detailed information about the files and sub-directories under the current working directory in
the form of a list.
sftp-client> dir
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 config.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey1
-rwxrwxrwx 1 noone nogroup 225 Sep 28 08:28 pub1
drwxrwxrwx 1 noone nogroup 0 Sep 28 08:24 new1
drwxrwxrwx 1 noone nogroup 0 Sep 28 08:18 new2
-rwxrwxrwx 1 noone nogroup 225 Sep 28 08:30 pub2
display sftp client source
Syntax
display sftp client source
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display sftp client source command to display the source IP address or source interface
currently set for the SFTP client.
If neither source IP address nor source interface is specified for the SFTP client, the system will display
such a message “Neither source IP address nor source interface was specified for the SFTP client.”
Related commands: sftp client source.
Examples
# Display the source IP address of the SFTP client.
<Sysname> display sftp client source
The source IP address you specified is 192.168.0.1
To Next Page
Loading...
Need help?
General