H3C S5120-SI Series

1-19
Field Description
Transceiver Type Pluggable transceiver type
Connector Type
Type of the connectors of the transceiver:
z Optical connectors, including SC (SC connector,
developed by NTT) and LC (LC connector, 1.25
mm/RJ-45 optical connector developed by Lucent).
z Other connectors, including RJ-45 and CX 4.
Wavelength(nm)
z Optical transceiver: central wavelength of the laser
sent, in nm. If the transceiver supports multiple
wavelengths, every two wavelength values are
separated by a comma.
z Electrical transceiver: displayed as N/A.
Transfer distance(xx)
Transfer distance, with xx representing km for single-mode
transceivers and m for other transceivers. If the transceiver
supports multiple transfer medium, every two values of the
transfer distance are separated by a comma. The
corresponding transfer medium is included in the bracket
following the transfer distance value. The following are the
transfer media:
z 9 um: 9/125 um single-mode fiber
z 50 um: 50/125 um multi-mode fiber
z 62.5 um: 62.5/125 um multi-mode fiber
z TP: Twisted pair
z CX4: CX4 cable
Digital Diagnostic Monitoring
Whether the digital diagnosis function is supported, where:
z YES: supported
z NO: not supported
Vendor Name
Vendor name or name of the vendor who customizes the
transceiver:
z H3C customized anti-spoofing transceiver: H3C is
displayed.
z Other transceivers: The vendor name is displayed.
Ordering Name Pluggable transceiver model
display transceiver manuinfo
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
View
Any view
Default Level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays part of the electrical label information of the H3C
customized anti-spoofing pluggable transceiver plugged in the specified interface. interface-type
interface-number represents interface type and interface number. If it is not specified, the command