1-10
group group-name: Displays SNMPv3 user information for a specified SNMP group name. It is case
sensitive.
Description
Use the display snmp-agent usm-user command to display SNMPv3 user information.
Examples
# Display SNMPv3 information of all created users.
<Sysname> display snmp-agent usm-user
User name: userv3
Group name: mygroupv3
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
User name: userv3code
Group name: groupv3code
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
Table 1-6 display snmp-agent usm-user command output description
Field Description
User name SNMP user name
Group name SNMP group name
Engine ID Engine ID for an SNMP entity
Storage-type
Storage type, which can be the following:
z volatile
z nonvolatile
z permanent
z readOnly
z other
See Table 1-1
for details.
UserStatus SNMP user status
enable snmp trap updown
Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Interface view
To Next Page
Loading...
Need help?
General