H3C S5120-SI Series Command Reference

1-12
quit the aggregation group. For description of aggregation configurations, refer to Link Aggregation
Configuration.
Examples
# Enable NTDP globally.
<Sysname> system-view
[Sysname] ntdp enable
# Enable NTDP for port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] ntdp enable
ntdp explore
Syntax
ntdp explore
View
User view
Default Level
2: System level
Parameters
None
Description
Use the ntdp explore command to start topology information collection manually.
Examples
# Start topology information collection manually.
<Sysname> ntdp explore
ntdp hop
Syntax
ntdp hop hop-value
undo ntdp hop
View
System view
Default Level
2: System level

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English