1-6
Default Level
2: System level
Parameters
url-string: URL of the server for certificate request, a case-insensitive string of 1 to 127 characters. It
comprises the location of the server and the location of CGI command interface script in the format of
http: //server_location/ca_script_location, where server_location must be an IP address and does not
support domain name resolution currently.
Description
Use the certificate request url command to specify the URL of the server for certificate request
through SCEP.
Use the undo certificate request url command to remove the configuration.
By default, no URL is specified for a PKI domain.
Examples
# Specify the URL of the server for certificate request.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request url
http://169.254.0.100/certsrv/mscep/mscep.dll
common-name
Syntax
common-name name
undo common-name
View
PKI entity view
Default Level
2: System level
Parameters
name: Common name of an entity, a case-insensitive string of 1 to 31 characters. No comma can be
included.
Description
Use the common-name command to configure the common name of an entity, which can be, for
example, the user name.
Use the undo common-name command to remove the configuration.
By default, no common name is specified.
To Next Page
Loading...
Need help?
General