2-1
2 Priority Mapping Configuration Commands
Priority Mapping Table Configuration Commands
display qos map-table
Syntax
display qos map-table [ dot1p-dot1p | dot1p-dscp | dot1p-lp | dscp-dot1p| dscp-dscp | dscp-lp ]
View
Any view
Default Level
1: Monitor level
Parameters
dot1p-dot1p: 802.1p-precedence-to-802.1p-precedence mapping table.
dot1p-dscp: 802.1p-precedence-to-DSCP mapping table.
dot1p-lp: 802.1p-precedence-to-local-precedence mapping table.
dscp-dot1p: DSCP-to-802.1p-precedence mapping table.
dscp-dscp: DSCP-to-DSCP mapping table.
dscp-lp: DSCP-to-local-precedence mapping table.
Description
Use the display qos map-table command to display the configuration of a priority mapping table.
If no priority mapping table is specified, the configuration information of all priority mapping tables is
displayed.
Related commands: qos map-table.
Examples
# Display the configuration information of the 802.1p-precedence-to-local-precedence mapping table.
<Sysname> display qos map-table dot1p-lp
MAP-TABLE NAME: dot1p-lp TYPE: pre-define
IMPORT : EXPORT
0 : 2
1 : 0
2 : 1
3 : 3
4 : 4
5 : 5
6 : 6
To Next Page
Loading...
Need help?
General