2-17
Parameters
None
Description
Use the reset radius statistics command to clear RADIUS statistics.
Related commands: display radius scheme.
Examples
# Clear RADIUS statistics.
<Sysname> reset radius statistics
reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name user-name }
View
User view
Default Level
2: System level
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a string of 1 to 32
characters.
session-id session-id: Specifies a session by its ID, a string of 1 to 50 characters.
time-range start-time stop-time: Specifies a time range by its start time and end time in the format of
hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Specifies a username based on which to reset the stop-accounting buffer. The
username is a case-sensitive string of 1 to 80 characters. The format of the user-name argument (for
example, whether the domain name should be included) must comply with that specified for usernames
to be sent to the RADIUS server in the RADIUS scheme.
Description
Use the reset stop-accounting-buffer command to clear the buffered stop-accounting requests,
which get no responses.
Related commands: stop-accounting-buffer enable, retry stop-accounting, user-name-format,
display stop-accounting-buffer.
Examples
# Clear the buffered stop-accounting requests for user user0001@test.
<Sysname> reset stop-accounting-buffer user-name user0001@test
# Clear the buffered stop-accounting requests in the time range from 0:0:0 to 23:59:59 on August 31,
2006.
To Next Page
Loading...
Need help?
General