H3C S5120-SI Series

1-11
Used Rate: 16%
Table 1-5 display memory command output description
Field Description
System Total Memory(bytes) Total size of the system memory (in bytes)
Total Used Memory(bytes) Size of the memory used (in bytes)
Used Rate Percentage of the memory used to the total memory
display power
Syntax
display power [ power-id ]
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display power command to display the PSU information of a device.
Examples
# Display the PSU information of the device.
<Sysname> display power
Power 0 State: Normal
Table 1-6 display power command output description
Field Description
Power PSU number
State
PSU state:
z Normal
z Absent
z Fault
display reboot-type
Syntax
display reboot-type