EasyManuals Logo

H3C S5120-SI Series Command Reference

H3C S5120-SI Series
910 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #838 background imageLoading...
Page #838 background image
1-45
tftp-server
Syntax
tftp-server ip-address
undo tftp-server
View
Cluster view
Default Level
2: System level
Parameters
ip-address: IP address of a TFTP server.
Description
Use the tftp-server command to configure a shared TFTP server for a cluster.
Use the undo tftp-server command to cancel the TFTP server of the cluster.
By default, no TFTP server is configured.
Note that this command can be executed on the management device only.
Examples
# Configure a shared TFTP server on the management device as 1.0.0.9.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] tftp-server 1.0.0.9
timer
Syntax
timer interval
undo timer
View
Cluster view
Default Level
2: System level
Parameters
interval: Interval (in seconds) to send handshake packets. This argument ranges from 1 to 255.

Table of Contents

Other manuals for H3C S5120-SI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5120-SI Series and is the answer not in the manual?

H3C S5120-SI Series Specifications

General IconGeneral
BrandH3C
ModelS5120-SI Series
CategorySwitch
LanguageEnglish

Related product manuals