1-10
Related commands: qos policy.
Examples
# Associate traffic class database with traffic behavior test in QoS policy user1.
<Sysname> system-view
[Sysname] qos policy user1
[Sysname-qospolicy-user1] classifier database behavior test
[Sysname-qospolicy-user1]
display qos policy
Syntax
display qos policy user-defined [ policy-name [ classifier tcl-name ] ]
View
Any view
Default Level
1: Monitor level
Parameters
user-defined: Displays user-defined QoS policies.
policy-name: QoS policy name, a string of 1 to 31 characters. If no policy is specified, configuration
information of all the policies is displayed.
tcl-name: Class name, a string of 1 to 31 characters.
Description
Use the display qos policy command to display user-defined QoS policy configuration information.
Examples
# Display the configuration information of user-defined QoS policies.
<Sysname> display qos policy user-defined
User Defined QoS Policy Information:
Policy: 1
Classifier: 1
Behavior: 1
Redirect enable:
Redirect type: interface
Redirect destination: GigabitEthernet1/0/7
Table 1-4 display qos policy command output description
Field Description
Policy Policy name
To Next Page
Loading...
Need help?
General