H3C S5120-SI Series

1-1
1 Port Mirroring Configuration Commands
Port Mirroring Configuration Commands
display mirroring-group
Syntax
display mirroring-group { group-id | local }
View
Any view
Default Level
2: System level
Parameters
group-id: Number of the mirroring group to be displayed, which can only be 1.
local: Displays local mirroring groups.
Description
Use the display mirroring-group command to display information about the specified mirroring group.
Examples
# Display information about mirroring group 1.
<Sysname> display mirroring-group 1
mirroring-group 1:
type: local
status: active
mirroring port:
GigabitEthernet1/0/2 both
monitor port: GigabitEthernet1/0/3
Field Description
mirroring-group Number of the mirroring group
type Type of the mirroring group, which can be local only.
status Status of the mirroring group, which can be active or inactive.