2-2
accounting-on enable interval
Syntax
accounting-on enable interval seconds
undo accounting-on interval
View
RADIUS scheme view
Default Level
2: System level
Parameters
seconds: Time interval to retransmit accounting-on packet in seconds, ranging from 1 to 15.
Description
Use the accounting-on enable interval command to configure the retransmission interval of
accounting-on packets.
Use the undo accounting-on enable interval command to restore the default.
By default, the retransmission interval of accounting-on packets is 3 seconds.
Note that:
z Execution of this command does not affect the results of other accounting-on related commands
such as accounting-on enable. That is, execution of the undo accounting-on enable interval
command will not disable the accounting-on feature.
z The retransmission interval configured with this command takes effect immediately.
Related commands: radius scheme, accounting-on enable.
Examples
# In RADIUS scheme rd, set the retransmission interval of accounting-on packet to 5 seconds.
<Sysname> system-view
[Sysname] radius scheme rd
[Sysname-radius-rd] accounting-on enable interval 5
accounting-on enable send
Syntax
accounting-on enable send send-times
undo accounting-on send
View
RADIUS scheme view
Default Level
2: System level
To Next Page
Loading...
Need help?
General