EasyManuals Logo

H3C S5120-SI Series Command Reference

H3C S5120-SI Series
910 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #531 background imageLoading...
Page #531 background image
1-4
View
System view
Default Level
2: System level
Parameters
times: Maximum number of authentication attempts, in the range 1 to 5.
Description
Use the ssh server authentication-retries command to set the maximum number of SSH connection
authentication attempts.
Use the undo ssh server authentication-retries command to restore the default.
By default, the maximum number of SSH connection authentication attempts is 3.
Note that:
z This configuration takes effect only for users trying to log in after the configuration.
z Authentication will fail if the number of authentication attempts (including both publickey and
password authentication) exceeds that specified in the ssh server authentication-retries
command.
z If the authentication method of SSH users is password-publickey, the maximum number of SSH
connection authentication attempts must be at least 2. This is because SSH2.0 users must pass
both password and publickey authentication.
Related commands: display
ssh server.
Examples
# Set the maximum number of SSH connection authentication attempts to 4.
<Sysname> system-view
[Sysname] ssh server authentication-retries 4
ssh server authentication-timeout
Syntax
ssh server authentication-timeout time-out-value
undo ssh server authentication-timeout
View
System view
Default Level
2: System level
Parameters
time-out-value: Authentication timeout period in seconds, in the range 1 to 120.

Table of Contents

Other manuals for H3C S5120-SI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5120-SI Series and is the answer not in the manual?

H3C S5120-SI Series Specifications

General IconGeneral
BrandH3C
ModelS5120-SI Series
CategorySwitch
LanguageEnglish

Related product manuals