1-5
Field Description
sync state
State of the state machine
The displayed value is an integral that ranges from 0 to 5.
precision Precision of the system clock
version
NTP version
The displayed value is an integral that ranges from 1 to 3.
peer interface
Source interface
If the source interface is not specified, this field will be
wildcard.
reftime Reference timestamp in the NTP message
orgtime Originate timestamp in the NTP message
rcvtime Receive timestamp in the NTP message
xmttime Transmit timestamp in the NTP message
filter delay Delay information
filter offset Offset information
filter disper Dispersion information
Total associations Total number of associations
When a device is working in the NTP broadcast/multicast server mode, the display ntp-service
sessions command executed on the device will not display the NTP session information corresponding
to the broadcast/multicast server, but the sessions will be counted in the total number of associations.
display ntp-service status
Syntax
display ntp-service status
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ntp-service status command to view the NTP service status information.
To Next Page
Loading...
Need help?
General