1-3
Examples
# View the statistics information of IGMP messages learned by IGMP snooping.
<Sysname> display igmp-snooping statistics
Received IGMP general queries:0.
Received IGMPv1 reports:0.
Received IGMPv2 reports:19.
Received IGMP leaves:0.
Received IGMPv2 specific queries:0.
Sent IGMPv2 specific queries:0.
Received IGMPv3 reports:1.
Received IGMPv3 reports with right and wrong records:0.
Received IGMPv3 specific queries:0.
Received IGMPv3 specific sg queries:0.
Sent IGMPv3 specific queries:0.
Sent IGMPv3 specific sg queries:0.
Received error IGMP messages:19.
Table 1-2 display igmp-snooping statistics command output description
Field Description
general queries
General query messages
specific queries
Group-specific query messages
reports
Report messages
leaves
Leave messages
reports with right and wrong records Report messages with correct and incorrect records
specific sg query packet(s)
Group-and-source-specific query message(s)
error IGMP messages IGMP messages with errors
dot1p-priority
Syntax
dot1p-priority priority-number
undo dot1p-priority
View
IGMP-Snooping view
Default Level
2: System level
Parameters
priority-number: Specifies 802.1p precedence for IGMP messages, in the range of 0 to 7. The higher the
number, the higher the precedence.
To Next Page
Loading...
Need help?
General