1-14
undo dot1x quiet-period
View
System view
Default Level
2: System level
Parameters
None
Description
Use the dot1x quiet-period command to enable the quiet timer.
Use the undo dot1x quiet-period command to disable the timer.
By default, the timer is disabled.
After a client fails the authentication, the device refuses further authentication requests from the client in
the period dictated by the quiet timer.
Related commands: display dot1x, dot1x timer.
Examples
# Enable the quiet timer.
<Sysname> system-view
[Sysname] dot1x quiet-period
dot1x re-authenticate
Syntax
dot1x re-authenticate
undo dot1x re-authenticate
View
Ethernet interface view
Default Level
2: System level
Parameters
None
Description
Use the dot1x re-authenticate command to enable the periodic re-authentication function.
Use the undo dot1x re-authenticate command to disable the function.
By default, this function is disabled.
After periodic re-authentication is enabled on a port, the device will perform 802.1X authentication for
online users on the port at the interval specified by the periodic re-authentication timer (which is
To Next Page
Loading...
Need help?
General