1-13
rmon event
Syntax
rmon event entry-number [ description string ] { log | log-trap log-trapcommunity | none | trap
trap-community } [ owner text ]
undo rmon event entry-number
View
System view
Default Level
2: System level
Parameters
entry-number: Event entry index, in the range 1 to 65,535.
description string: Event description, a string of 1 to 127 characters.
log: Logs the event when it occurs.
log-trap log-trapcommunity: Log and trap events. The system performs both logging and trap sending
when the event occurs. log-trapcommunity indicates the community name of the network management
station that receives trap messages, a string of 1 to 127 characters.
none: Performs no action when the event occurs.
trap trap-community: Trap event. The system sends a trap with a community name when the event
occurs. trap-community specifies the community name of the network management station that
receives trap messages, a string of 1 to 127 characters.
owner text: Owner of the entry, a string of 1 to 127 characters. It is case sensitive and space is
supported.
Description
Use the rmon event command to create an entry in the RMON event table.
Use the undo rmon event command to remove a specified entry from the RMON event table.
When create an event entry, you can define the actions that the system will take when the event is
triggered by its associated alarm in the alarm table. According to your configuration, the system can log
the event, send a trap, do both, or do neither at all.
Related commands: display rmon event, rmon alarm, rmon prialarm.
z An entry cannot be created if the values of the specified event description (description string),
event type (log, trap, logtrap or none), and community name (trap-community or
log-trapcommunity) are identical to those of the existing event entry in the system.
z You can create up to 60 event entries.
To Next Page
Loading...
Need help?
General