H3C S5120-SI Series Command Reference

1-1
1 Stack Management Configuration Commands
Stack Management Configuration Commands
display stack
Syntax
display stack [ members ]
View
Any view
Default Level
1: Monitor level
Parameters
members: Displays stack information of the stack members, including the master device and the slave
devices. This keyword is only available to the master device of a stack.
Description
Use the display stack command to display the stack information.
Examples
# Display stack information on the master device.
<stack_0.Sysname> display stack
Role: Master
Management VLAN: 1
IP pool: 1.1.1.1/24
Device total number: 3
# Display stack information on a slave device.
<stack_1.Sysname> display stack
Role: Slave
Management VLAN: 1
IP pool: 1.1.1.1/24
Master MAC address: 000f-e200-1000

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English