1-16
Examples
# Configure VTY 0 to support only SSH protocol.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0] protocol inbound ssh
screen-length
Syntax
screen-length screen-length
undo screen-length
View
User interface view
Default Level
2: System level
Parameters
screen-length: Number of lines the screen can contain. This argument ranges from 0 to 512 and
defaults to 24.
Description
Use the screen-length command to set the number of lines the terminal screen can contain.
Use the undo screen-length command to revert to the default number of lines.
You can use the screen-length 0 command to disable the function to display information in pages.
Examples
# Set the number of lines the terminal screen can contain to 20.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] screen-length 20
send
Syntax
send { all | number | type number }
View
User view
Default Level
1: Monitor level
To Next Page
Loading...
Need help?
General