1-1
1 RMON Configuration Commands
RMON Configuration Commands
display rmon alarm
Syntax
display rmon alarm [ entry-number ]
View
Any view
Default Level
1: Monitor level
Parameters
entry-number: Index of an RMON alarm entry, in the range 1 to 65535. If no entry is specified, the
configuration of all alarm entries is displayed.
Description
Use the display rmon alarm command to display the configuration of the specified or all RMON alarm
entries.
Related commands: rmon alarm.
Examples
# Display the configuration of all RMON alarm table entries.
<Sysname> display rmon alarm
AlarmEntry 1 owned by user1 is VALID.
Samples type : absolute
Variable formula : 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
Sampling interval : 10(sec)
Rising threshold : 50(linked with event 1)
Falling threshold : 5(linked with event 2)
When startup enables : risingOrFallingAlarm
Latest value : 0
Table 1-1 display rmon alarm command output description
Field Description
AlarmEntry entry-number owned by
owner is status
The status of the alarm entry entry-number created by
the owner is status.
z entry-number: Alarm entry, corresponding to the
management information base (MIB) node
alarmIndex.
To Next Page
Loading...
Need help?
General