H3C S5120-SI Series

1-20
reset dhcp relay statistics
Syntax
reset dhcp relay statistics [ server-group group-id ]
View
User view
Default Level
1: Monitor level
Parameters
server-group group-id: Specifies a server group ID (in the range of 0 to 19) about which to remove
statistics from the relay agent.
Description
Use the reset dhcp relay statistics command to remove statistics from the relay agent.
If no server-group is specified, all statistics will be removed from the relay agent.
Related commands: display dhcp relay statistics.
Examples
# Remove all statistics from the DHCP relay agent.
<Sysname> reset dhcp relay statistics