EasyManuals Logo

H3C S5120-SI Series Command Reference

H3C S5120-SI Series
910 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #444 background imageLoading...
Page #444 background image
1-15
Note that:
z Binding attributes are checked upon authentication of a local user. If the binding attributes of a local
user do not match the configured ones, the checking will fail and the user will fail the authentication
as a result. In addition, such binding attribute checking does not take the service types of the users
into account. That is, a configured binding attribute is effective on all types of users. Therefore, be
cautious when deciding which binding attributes should be configured for which type of local users.
z The bind-attribute ip command applies only when the authentication method (802.1X, for
example) supports IP address upload. If you configure the command when the authentication
method (MAC address authentication, for example) does not support IP address upload, local
authentication will fail.
Examples
# Configure the bound IP of local user abc as 3.3.3.3.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] bind-attribute ip 3.3.3.3
cut connection
Syntax
cut connection { access-type dot1x | all | domain isp-name | interface interface-type
interface-number | ip ip-address | mac mac-address | ucibindex ucib-index | user-name user-name |
vlan vlan-id }
View
System view
Default Level
2: System level
Parameters
access-type dot1x: Specifies the user connections of 802.1X authentication access type.
all: Specifies all user connections.
domain isp-name: Specifies all user connections of an ISP domain. The isp-name argument refers to
the name of an existing ISP domain and is a string of 1 to 24 characters.
interface interface-type interface-number: Specifies user connections on an interface by the interface
type and number.
ip ip-address: Specifies the user connections of an IP address.
mac mac-address: Specifies the user connections of a MAC address, with mac-address in the format of
H-H-H.
ucibindex ucib-index: Specifies a user connection by connection index. The value ranges from 0 to
4294967295.
user-name user-name: Specifies a user connection by username. The user-name argument is a
case-sensitive string of 1 to 80 characters and must contain the domain name. If you enter a username
without any domain name, the system assumes that the default domain name is used for the username.

Table of Contents

Other manuals for H3C S5120-SI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5120-SI Series and is the answer not in the manual?

H3C S5120-SI Series Specifications

General IconGeneral
BrandH3C
ModelS5120-SI Series
CategorySwitch
LanguageEnglish

Related product manuals