1-6
display arp timer aging
Syntax
display arp timer aging
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display arp timer aging command to display the aging time for dynamic ARP entries.
Related commands: arp timer aging.
Examples
# Display the aging time for dynamic ARP entries.
<Sysname> display arp timer aging
Current ARP aging time is 10 minute(s)
reset arp
Syntax
reset arp { all | dynamic | static | interface interface-type interface-number }
View
User view
Default Level
2: System level
Parameters
all: Clears all ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.
interface interface-type interface-number: Clears the ARP entries for the interface specified by the
argument interface-type interface-number.
Description
Use the reset arp command to clear ARP entries except authorized ARP entries from the ARP mapping
table.
Related commands: arp static, display arp.
To Next Page
Loading...
Need help?
General