1-21
Default Level
2: System level
Parameters
group-name: User group name, a case-insensitive string of 1 to 32 characters.
Description
Use the display user-group command to display configuration information about one or all user
groups.
Related commands: user-group.
Examples
# Display configuration information about user group abc.
<Sysname> display user-group abc
The contents of user group abc:
Authorization attributes:
Idle-cut: 120(min)
Work Directory: FLASH:
Level: 1
Acl Number: 2000
Vlan ID: 1
User-Profile: 1
Callback-number: 1
Total 1 user group(s) matched.
domain
Syntax
domain isp-name
undo domain isp-name
View
System view
Default Level
3: Manage level
Parameters
isp-name: ISP domain name, a case-insensitive string of 1 to 24 characters that cannot contain any
forward slash (/), colon (:), asterisk (*), question mark (?), less-than sign (<), greater-than sign (>), or @.
Description
Use the domain isp-name command to create an ISP domain and/or enter ISP domain view.
Use the undo domain command to remove an ISP domain.
By default, a default ISP domain named system exists in the system.
To Next Page
Loading...
Need help?
General