1-4
Associated with an ACL, the FTP server can deny the FTP requests of some FTP clients and only
permit the access of clients allowed by the ACL rules. This configuration only filters the FTP
connections to be established, and has no effect on the established FTP connections and operations. If
you execute the command for multiple times, the last specified ACL takes effect.
Examples
# Associate the FTP service with ACL 2001 to allow only the client 1.1.1.1 to access the device through
FTP.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule 0 permit source 1.1.1.1 0
[Sysname-acl-basic-2001] rule 1 deny source any
[Sysname-acl-basic-2001] quit
[Sysname] ftp server acl 2001
ftp server enable
Syntax
ftp server enable
undo ftp server
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the ftp server enable command to enable the FTP server and allow the login of FTP users.
Use the undo ftp server command to disable the FTP server.
By default, the FTP server is disabled.
Examples
# Enable the FTP server.
<Sysname> system-view
[Sysname] ftp server enable
ftp timeout
Syntax
ftp timeout minute
undo ftp timeout
To Next Page
Loading...
Need help?
General