1-4
# Configure ISP domain test to use RADIUS accounting scheme rd for all types of users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting default radius-scheme rd local
accounting lan-access
Syntax
accounting lan-access { local | none | radius-scheme radius-scheme-name [ local ] }
undo accounting lan-access
View
ISP domain view
Default Level
2: System level
Parameters
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the accounting lan-access command to configure the accounting method for LAN access users.
Use the undo accounting lan-access command to restore the default.
By default, the default accounting method that the accounting default command prescribes is used for
LAN access users.
Note that the RADIUS scheme specified for the current ISP domain must have been configured.
Related commands: accounting default, radius scheme.
Examples
# Configure the default ISP domain system to use the local accounting method for LAN access users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting lan-access local
# Configure ISP domain test to use RADIUS accounting scheme rd for LAN access users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access radius-scheme rd local
To Next Page
Loading...
Need help?
General