H3C S5120-SI Series Command Reference

1-1
1 HABP Configuration Commands
HABP Configuration Commands
display habp
Syntax
display habp
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display habp command to display HABP configuration information.
If the HABP function is not enabled on the device, this command does not display the HABP
configuration but only the running status of the HABP function.
Examples
# Display HABP configuration information.
<Sysname> display habp
Global HABP information:
HABP Mode: Server
Sending HABP request packets every 20 seconds
Bypass VLAN: 2
Table 1-1 display habp command output description
Field Description
HABP Mode HABP mode of the current device, server or client
Sending HABP request packets every 20
seconds
The HABP server sends HABP request packets at an
interval of 20 seconds.
Bypass VLAN
ID of the VLAN in which HABP packets are
transmitted

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English