1-3
Parameters
None
Description
Use the display habp traffic command to display HABP packet statistics.
Examples
# Display HABP packet statistics.
<Sysname> display habp traffic
HABP counters :
Packets output: 0, Input: 0
ID error: 0, Type error: 0, Version error: 0
Sent failed: 0
Table 1-3 display habp traffic command output description
Field Description
Packets output Number of HABP packets sent
Input Number of HABP packets received
ID error Number of packets with an incorrect ID
Type error Number of packets with an incorrect type
Version error
Number of packets with an incorrect version
number
Sent failed Number of packets failed to be sent
habp enable
Syntax
habp enable
undo habp enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the habp enable command to enable HABP.
Use the undo habp enable command to disable HABP.
By default, HABP is enabled.
To Next Page
Loading...
Need help?
General