EasyManuals Logo

H3C S5120-SI Series Command Reference

H3C S5120-SI Series
910 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
1-31
storm-constrain interval
Syntax
storm-constrain interval seconds
undo storm-constrain interval
View
System view
Default Level
2: System level
Parameters
seconds: Interval for generating traffic statistics, in the range 1 to 300 (in seconds).
Description
Use the storm-constrain interval command to set the interval for generating traffic statistics.
Use the undo storm-constrain interval command to restore the default.
By default, the interval for generating traffic statistics is 10 seconds.
z The interval set by the storm-constrain interval command is specifically for the storm constrain
function. It is different form that set by the flow-interval command.
z For network stability consideration, configure the interval for generating traffic statistics to a value
that is not shorter than the default.
Examples
# Set the interval for generating traffic statistics to 60 seconds.
<Sysname> system-view
[Sysname] storm-constrain interval 60
unicast-suppression
Syntax
unicast-suppression { ratio | pps max-pps | kbps max-bps }
undo unicast-suppression
View
Ethernet port view, port group view
Default Level
2: System level

Table of Contents

Other manuals for H3C S5120-SI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5120-SI Series and is the answer not in the manual?

H3C S5120-SI Series Specifications

General IconGeneral
BrandH3C
ModelS5120-SI Series
CategorySwitch
LanguageEnglish

Related product manuals