1-16
Table 1-3 display dhcp relay security command output description
Field Description
IP Address Client IP address
MAC Address Client MAC address
Type Type of binding, including dynamic, static, and temporary.
Interface
Layer 3 interface connecting to the DHCP client. If no interface is recorded in
the binding entry, “N/A” is displayed.
display dhcp relay security statistics
Syntax
display dhcp relay security statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp relay security statistics command to display statistics information about
bindings of DHCP relay agents.
Examples
# Display statistics about bindings of DHCP relay agents.
<Sysname> display dhcp relay security statistics
Static Items :1
Dynamic Items :0
Temporary Items :0
All Items :1
Table 1-4 display dhcp relay security statistics command output description
Field Description
Static Items Static binding items
Dynamic Items Dynamic binding items
Temporary Items Temporary binding items
All Items All binding items
To Next Page
Loading...
Need help?
General