H3C S5120-SI Series Command Reference

1-22
Parameters
delay: LLDP re-initialization delay to be set, in the range 1 to 10 (in seconds).
Description
Use the lldp timer reinit-delay command to set the LLDP re-initialization delay.
Use the undo lldp timer reinit-delay command to restore the default.
By default, the LLDP re-initialization delay is 2 seconds.
Examples
# Set the LLDP re-initialization delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer reinit-delay 4
lldp timer tx-delay
Syntax
lldp timer tx-delay delay
undo lldp timer tx-delay
View
System view
Default level
2: System level
Parameters
delay: LLDPDU transmit delay, in the range 1 to 8192 (in seconds).
Description
Use the lldp timer tx-delay command to set the LLDPDU transmit delay.
Use the undo lldp timer tx-delay command to restore the default.
By default, the LLDPDU transmit delay is 2 seconds.
Examples
# Set the LLDPDU transmit delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-delay 4
lldp timer tx-interval
Syntax
lldp timer tx-interval interval
undo lldp timer tx-interval

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English