1-17
Default Level
2: System level
Parameters
org-name: Organization name, a case-insensitive string of 1 to 31 characters. No comma can be
included.
Description
Use the organization command to configure the name of the organization to which the entity belongs.
Use the undo organization command to remove the configuration.
By default, no organization name is specified for an entity.
Examples
# Configure the name of the organization to which an entity belongs as org-name.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] organization org-name
organization-unit
Syntax
organization-unit org-unit-name
undo organization-unit
View
PKI entity view
Default Level
2: System level
Parameters
org-unit-name: Organization unit name for distinguishing different units in an organization, a
case-insensitive string of 1 to 31 characters. No comma can be included.
Description
Use the organization-unit command to specify the name of the organization unit to which this entity
belongs.
Use the undo organization-unit command to remove the configuration.
By default, no organization unit name is specified for an entity.
Examples
# Configure the name of the organization unit to which an entity belongs as unit-name.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] organization-unit unit-name
To Next Page
Loading...
Need help?
General