H3C S5120-SI Series Command Reference

1-3
Examples
# Display the information of all SNMP agent groups.
<Sysname> display snmp-agent group
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonVolatile
Table 1-2 display snmp-agent group command output description
Field Description
Group name SNMP group name
Security model
Security model of the SNMP group, which can be: authPriv
(authentication with privacy), authNoPriv (authentication
without privacy), or noAuthNoPriv (no authentication no
privacy).
Readview The read only MIB view associated with the SNMP group
Writeview The writable MIB view associated with the SNMP group
Notifyview
The notify MIB view associated with the SNMP group, the
view with entries that can generate traps
Storage-type
Storage type, which includes: volatile, nonVolatile,
permanent, readOnly, and other. For detailed information,
refer to Table 1-1
.
display snmp-agent local-engineid
Syntax
display snmp-agent local-engineid
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display snmp-agent local-engineid command to display the local SNMP agent engine ID.
SNMP engine ID identifies an SNMP entity uniquely within an SNMP domain. SNMP engine is an
indispensable part of an SNMP entity. It provides the SNMP message allocation, message handling,
authentication, and access control.

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English