H3C S5120-SI Series Command Reference

1-7
Examples
# Configure the common name of an entity as test.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] common-name test
country
Syntax
country country-code-str
undo country
View
PKI entity view
Default Level
2: System level
Parameters
country-code-str: Country code for the entity, a 2-character case-insensitive string.
Description
Use the country command to specify the code of the country to which an entity belongs. It is a standard
2-character code, for example, CN for China.
Use the undo country command to remove the configuration.
By default, no country code is specified.
Examples
# Set the country code of an entity to CN.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] country CN
crl check
Syntax
crl check { disable | enable }
View
PKI domain view
Default Level
2: System level

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English