2-3
View
System view
Default Level
3: Manage level
Parameters
policy-name: Name of the certificate attribute access control policy, a string of 1 to 16 characters.
Description
Use the ip https certificate access-control-policy command to associate the HTTPS service with a
certificate attribute access control policy.
Use the undo ip https certificate access-control-policy command to remove the association.
By default, the HTTPS service is not associated with any certificate attribute access control policy.
Association of the HTTPS service with a certificate attribute access control policy can control the
access rights of clients.
Related commands: display ip https and pki certificate access-control-policy. (In PKI Commands)
Examples
# Associate the HTTPS server to certificate attribute access control policy myacl.
<Sysname> system-view
[Sysname] ip https certificate access-control-policy myacl
ip https enable
Syntax
ip https enable
undo ip https enable
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the ip https enable command to enable the HTTPS service.
Use the undo ip https enable command to disable the HTTPS service.
By default, the HTTPS service is disabled.
The device can act as the HTTP server and the users can access and control the device through the
Web function only after the HTTP service is enabled.
To Next Page
Loading...
Need help?
General