1-11
Member of group2:
None
# Display details of the port group named group1.
<Sysname> display port-group manual name group1
Member of group1:
GigabitEthernet1/0/6 GigabitEthernet1/0/7 GigabitEthernet1/0/8
Table 1-3 display port-group manual command output description
Field Description
Member of group Member of the manual port group
display storm-constrain
Syntax
display storm-constrain [ broadcast | multicast | unicast ] [ interface interface-type
interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
broadcast: Displays the information about storm constrain for broadcast packets.
multicast: Displays the information about storm constrain for multicast packets.
unicast: Displays the information about storm constrain for unicast packets.
interface interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display storm-constrain command to display the information about storm constrain.
If you provide no argument or keyword, this command displays the information about storm constrain
for all types of packets on all the interfaces.
Examples
# Display the information about storm constrain for all types of packets on all the interfaces.
<Sysname> display storm-constrain
Abbreviation: BC - broadcast; MC - multicast; UC – unicast
Flow Statistic Interval: 5(second)
PortName Type LowerLimit UpperLimit CtrMode Status Trap Log SwiNum Unit
------------------------------------------------------------------------------
GE1/0/4 UC 456 465891 N/A normal on on 0 pps
To Next Page
Loading...
Need help?
General