H3C S5120-SI Series

1-7
Default Level
1: Monitor level
Parameters
level severity: Displays the summary of the log buffer, where severity represents information level, in
the range 0 to 7.
Description
Use the display logbuffer summary command to display the summary of the log buffer.
Examples
# Display the summary of the log buffer.
<Sysname> display logbuffer summary
EMERG ALERT CRIT ERROR WARN NOTIF INFO DEBUG
0 0 0 0 22 0 1 0
Table 1-6 display logbuffer summary command output description
Field Description
EMERG Represents emergency, refer to Table 1-4 for details
ALERT Represents alert, refer to Table 1-4 for details
CRIT Represents critical, refer to Table 1-4 for details
ERROR Represents error, refer to Table 1-4 for details
WARN Represents warning, refer to Table 1-4 for details
NOTIF Represents notice, refer to Table 1-4 for details
INFO Represents informational, refer to Table 1-4 for details
DEBUG Represents debug, refer to Table 1-4 for details
display logfile buffer
Syntax
display logfile buffer [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.