H3C S5120-SI Series Command Reference

1-3
Default Level
1: Monitor level
Parameters
None
Description
Use the display poe device command to display information about power sourcing equipments
(PSEs).
Examples
# Display the PSE information.
<Sysname> display poe device
PSE ID SlotNo SubSNo PortNum MaxPower(W) State Model
1 1 0 24 370 on LSW124POED
Table 1-1 display poe device command output description
Field Description
PSE ID
ID of the PSE. For a centralized device, this
field is 1.
SlotNo
Slot number of the PSE. For a centralized
device, this filed is 1.
SubSNo
Sub-slot number of the PSE. For a centralized
device, this field is 0.
PortNum Number of PoE interfaces on the PSE
MaxPower(W) Maximum power of the PSE (W)
State
PSE state:
on: The PSE is supplying power.
off: The PSE stops supplying power.
faulty: The PSE fails.
Model PSE model
display poe interface
Syntax
display poe interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English