To Next Page

To Previous Page

1-5

Examples

# Enter public key code view and input the key.

<Sysname> system-view

[Sysname] public-key peer key1

[Sysname-pkey-public-key] public-key-code begin

[Sysname-pkey-key-code]30819F300D06092A864886F70D010101050003818D0030818902818100C0EC801

4F82515F6335A0A

[Sysname-pkey-key-code]EF8F999C01EC94E5760A079BD73E4F4D97F3500EDB308C29481B77E719D164313

5877E13B1C531B4

[Sysname-pkey-key-code]FF1877A5E2E7B1FA4710DB0744F66F6600EEFE166F1B854E2371D5B952ADF6B80

EB5F52698FCF3D6

[Sysname-pkey-key-code]1F0C2EAAD9813ECB16C5C7DC09812D4EE3E9A0B074276FFD4AF2050BD4A9B1DDE

675AC30CB020301

[Sysname-pkey-key-code]0001

public-key-code end

Syntax

public-key-code end

View

Public key code view

Default Level

2: System level

Parameters

None

Description

Use the public-key-code end command to return from public key code view to public key view and to

save the configured public key.

The system verifies the key before saving it. If the key is not in the correct format, the system discards

the key and displays an error message. If the key is valid, the system saves the key.

Related commands: public-key peer, public-key-code begin.