1-1
1 QoS Policy Configuration Commands
Class Configuration Commands
display traffic classifier
Syntax
display traffic classifier user-defined [ tcl-name ]
View
Any view
Default Level
1: Monitor level
Parameters
user-defined: Displays user-defined classes.
tcl-name: Class name, a string of 1 to 31 characters.
Description
Use the display traffic classifier command to display information about classes.
If no class name is specified, information about all user-defined classes is displayed.
Examples
# Display information about all user-defined classes.
<Sysname> display traffic classifier user-defined
User Defined Classifier Information:
Classifier: USER1
Operator: AND
Rule(s) : if-match ip-precedence 5
Classifier: database
Operator: AND
Rule(s) : if-match acl 3131
Table 1-1 display traffic classifier user-defined command output description
Field Description
User Defined Classifier Information User-defined class information
Classifier Class name and its match criteria
Operator Logical relationship between match criteria
To Next Page
Loading...
Need help?
General