1-12
Field Description
Closed connections
Number of connections closed; in brackets are
connections closed accidentally (before receiving SYN
from the peer) and connections closed initiatively (after
receiving SYN from the peer)
Packets dropped with MD5 authentication Number of packets dropped by MD5 authentication
Packets permitted with MD5 authentication Number of packets permitted by MD5 authentication
display tcp status
Syntax
display tcp status
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display tcp status command to display status of all TCP connections for monitoring TCP
connections.
Examples
# Display status of all TCP connections.
<Sysname> display tcp status
*: TCP MD5 Connection
TCPCB Local Add:port Foreign Add:port State
03e37dc4 0.0.0.0:4001 0.0.0.0:0 Listening
04217174 100.0.0.204:23 100.0.0.253:65508 Established
Table 1-6 display tcp status command output description
Field Description
*
If the status information of a TCP connection contains *, the TCP adopts
the MD5 algorithm for authentication.
TCPCB TCP control block
Local Add:port Local IP address and port number
Foreign Add:port Remote IP address and port number
State State of the TCP connection
To Next Page
Loading...
Need help?
General