H3C S5120-SI Series

1-26
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy] rule 1 permit mygroup
state
Syntax
state state-name
undo state
View
PKI entity view
Default Level
2: System level
Parameters
state-name: State or province name, a case-insensitive string of 1 to 31 characters. No comma can be
included.
Description
Use the state command to specify the name of the state or province where an entity resides.
Use the undo state command to remove the configuration.
By default, no state or province is specified.
Examples
# Specify the state where an entity resides.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] state country