H3C S5120-SI Series Command Reference

1-13
ip http enable
Syntax
ip http enable
undo ip http enable
View
System view
Parameter
None
Description
Use the ip http enable command to launch the Web server.
Use the undo ip http enable command to shut down the Web server.
By default, the Web server is enable.
Example
# Shut down the Web server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo ip http enable
# Launch the Web server.
[Sysname] ip http enable
lock
Syntax
lock
View
User view
Default Level
3: Manage level
Parameters
None
Description
Use the lock command to lock the current user interface to prevent unauthorized users from operating
the user interface.
With the execution of this command, the system prompts to enter and confirm the password (up to 16
characters), and then locks the user interface.
To cancel the lock, press the Enter key and enter the correct password.

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English